Снимки экрана:
Описание
VirtualHere allows USB devices to be used remotely over a network just as if they were locally connected! One USB device can be redirected by this App in trial mode. To Purchase a license please visit https://www.virtualhere.com/purchase . (This app supports both Windows x86_64 and Windows ARM64)
Traditionally USB devices needed to be plugged directly into your computer to be used. With VirtualHere this is no longer required, the network itself becomes the cable transmitting USB signals (also known as USB over IP, USB/IP, USB over WiFi, USB over Ethernet, USB Device Server).
This USB server solution is perfect for allowing most USB devices (e.g Dongles, Gaming Wheels/Joysticks/Android Devices/Serial ports etc) to be used remotely over a LAN network, over the Internet, or in the Cloud without the USB device needing to be physically attached to remote client machine. The USB device appears as if it was directly attached even though it is plugged in remotely, therefore all existing drivers and software work, no special changes required!
To run:
1. Install this App 2. Download and run the VirtualHere client from here https://www.virtualhere.com/usb_client_software 3. The client will automatically find the VirtualHere server if it is on the same network. If its on a different network, in the client right click USB Hubs->Specify Hubs and put in the IP address of the VirtualHere Server
4. When the USB Devices appear listed in the Client right click on the device and select Use
Now the USB device is accessible on the client while being still connected to the server!
(Note the USB device is only usable by one client at a time. When its in use by a client it is not available at the server)