Екранни снимки:
Описание
- Supports multiple Modbus protocols, including: - Modbus RTU - Modbus ASCII - Modbus TCP/IP - Modbus UDP/IP - Modbus RTU Over TCP/IP - Modbus RTU Over UDP/IP - Monitor communication data on a serial line or Ethernet - You can write and send your own test strings in the Test Center and check the results returned from the slave in hexadecimal numbers. - Support up to 28 data formats, including: Signed, Unsigned, Hex, Binary, Long, Float, Double, etc. - Support switching between Modbus protocol address and PLC address - Draw real-time charts for data in any number of registers to monitor data trends - Supports simultaneous creation of multiple connected networks and a large number of master devices - Manage with multiple tabs and quickly switch between master devices - Manage registers in the form of tables, support adding variable names and comments, and support switching background and foreground colors - Export/Import slave device register data to Excel - Built-in byte conversion tool to facilitate the conversion of Long, Float, Double type data into data in registers - Built-in data verification tools, support CRC, LRC verification - Support rich Modbus function codes: - 01 (0x01) Read Coils - 02 (0x02) Read Discrete Inputs - 03 (0x03) Read Holding Registers - 04 (0x04) Read Input Registers - 05 (0x05) Write Single Coil - 06 (0x06) Write Single Register - 08 (0x08) Diagnostics (Serial Line only) - 11 (0x0B) Get Comm Event Counter (Serial Line only) - 15 (0x0F) Write Multiple Coils - 16 (0x10) Write Multiple Registers - 17 (0x11) Report Server ID (Serial Line only) - 22 (0x16) Mask Write Register - 23 (0x17) Read/Write Multiple Registers - 43 / 14 (0x2B / 0x0E) Read Device Identification