Начало > Приложения > Инструменти за разработчици
ICOM IC718 Rig Control

ICOM IC718 Rig Control

Издадено от: Aniruddha Bokil VU3FML
Licence: 38

Екранни снимки:

Минимални
ОС
Архитектураx86,x64,ARM,ARM64
Препоръчителни
ОС
Архитектураx86,x64,ARM,ARM64

Описание

1. Connect to and control the ICOM IC718 HF Radio using a FTDI USB ICOM programming CAT CI-V cable (https://www.ebay.com/itm/151268063957). 2. The user will be able to log the contacts to a text file in ADI format. The user can select a folder on their system to store the log file which can then be uploaded to qrz.com to store the QSOs. 3. The user can select the assigned COM port and Baud rate to connect to the radio. 4. The user can select to turn on/off the following functions: Pre-amplifier, Attenuator, Noise Blanker, VOX, Compressor, Digital Signal Processor (optional). It also displays the selection by an indicator. 5. The user can shift the frequency up/down in following steps: 1Hz, 100Hz, 1kHz, 10kHz, 100kHz. 6. The user can select the following bands: 160m, 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m. It also displays the selection by an indicator. 7. The user can select the following modes: LSB, USB, CW, RTTY, AM. It also displays the selection by an indicator. 8. The user can perform following VFO and Memory Management functions: Select VFO A (VFOA), Select VFO B (VFOB), Make VFO A same as B and vice versa (A=B) , Shift VFOA to VFO B and vice versa (A<>B), Change to Memory mode (V/M), Channel select (M), Memory Write (MW), Memory to VFO (M>V), Memory Clear (M-CL). 9. S-Meter bar with numerical S level indicator. 10. RF Power selector with indicator of selection. 11. Device ID indicator after successful connection. 12. Frequency, Band , Mode and UTC time information are collected automatically for faster logging of QSOs. The user only has to enter the call sign, select received signal report (RST RX) and transmitted report (RST TX) to log the contact. 13. Safely disconnect from the radio using the disconnect button or closing of the software window. 14. Live Date and Time in UTC format. 15. Scanning feature of the frequencies and memory channels. 16. Call sign lookup using qrz.com 17. Manual setting of the frequency. 18. Automatic Storing of ten favorite frequencies.


Possible future updates:


1. Setting of MIC gain 2. CW (Morse) settings.


Хората харесват също

TurboWarp
TurboWarp
Безплатно
Ubuntu 20.04.6 LTS
Ubuntu 20.04.6 LTS
Безплатно
Arch WSL
Arch WSL
Безплатно
Windows Performance Analyzer
Windows Performance Analyzer
Безплатно
Fluent Terminal
Fluent Terminal
Безплатно
HexEd.it
HexEd.it
Безплатно
Code Graph
Code Graph
Безплатно
ImageSharing
ImageSharing
Безплатно

рецензии

членове

за ICOM IC718 Rig Control
Advertisement
Top изтегляне
Популярни отскоро приложения
Топ оценени приложения
We use cookies and other technologies on this website to enhance your user experience.
By clicking any link on this page you are giving your consent to our Privacy Policy and Cookies Policy.